<TS-locale-strings>

<lsk_ana_add_1>
|Sorry, View lengths analysis is <b>not available</b> in <em>trial version</em>.|
<lsk_ana_add_2>
|Please <b>select</b> some analysis type(s), some scene(s) and some analysis element(s).|
<lsk_ana_view_1>
|Please <b>select</b> one <em>computed analysis</em> to view its results.|
<lsk_ana_export_1>
|Please <b>select</b> one or more <em>computed analysis</em> to export.|
<lsk_ana_compute_1>
|Please <b>select</b> one or more <em>unfinished analysis</em> to compute.|
<lsk_ana_vis_1>
|Please select, in * %s *, the surfaces you want to use in the visibility analysis.|

<lsk_ana_prome_1>
|@-27undo Multi-criteria analysis|
<lsk_ana_prome_2>
|Apply multi-criteria analysis on selected analyses|
<lsk_ana_prome_3>
|To perform a multi-criteria analysis, please <b>select at least</b> :
<ul><li><b>two</b> different models (scenes)</li><li>one analysis element</li><li>and, one analysis type</li></ul>
For more information refer to the help pages.|
<lsk_ana_prome_4>
|Before generating the multi-criteria analysis, TownScope will <b>create</b>, <b>add</b> and <b>compute</b>
each not found (%i) combination <em>analysis&nbsp;-&nbsp;scene&nbsp;-&nbsp;element</em>.
<br>&nbsp;<br>Do you wish to continue ?|

<lsk_defelem_0>
|<b>Attention</b> : The number of points to calculate is very high !<br>(more than %lli)
<br>&nbsp;<br>This will take long time to calculate and the results file will be very large.
<br>You may set the element step to higher values !
<br>&nbsp;<br> Do you wish to continue ?|
<lsk_defelem_1>
|Change the element type ?|
<lsk_defelem_2>
|Element already exists : <em>%s</em>|

<lsk_chkupdate_but>
|Check for updates|
<lsk_chkupdate_1>
|Connecting to the TownScope website & looking for updates...|
<lsk_chkupdate_2>
|Unable to download update information from the TownScope software website (error %i).
<br>&nbsp;<br>Please verify your internet connection.<br>If the problem persists 
contact <a href='mailto:azar@townscope.com'>S. Azar</a>.|
<lsk_chkupdate_3>
|Unable to find/open update information file.<br>
Your internet connection may not be available or,the TownScope site is not accessible for the moment.|
<lsk_chkupdate_4>
|A new version/update is available : %s (build %s)<br>&nbsp;<br>
Do you want to <b>download and install</b> this update <b>?</b><br>&nbsp;<br>
New in this release :<br>%s|
<lsk_chkupdate_5>
|Downloading the update package...|
<lsk_chkupdate_6>
|Unable to download the update package from the TownScope software website.|
<lsk_chkupdate_7>
|Update package - %s - was downloaded.<br><b>Quit</b> the application and install the update.|
<lsk_chkupdate_8>
|Your TownScope software is up-to-date.|

<lsk_io_1>
|Unable to find/open the scene file :<br>%s<br>&nbsp;<br>Do you want to choose (YES) it ?<br>Choose NO to cancel.|
<lsk_io_2>
|The results file is already loaded.<br>%s|

<lsk_io1_2>
|Unable to open/read scene file :<br>%s|
<lsk_io1_3>
|This scene file is already loaded :<br>%s|
<lsk_io1_4>
|Invalid (or corrupted) input file format :<br>%s|

<lsk_eras_1>
|There is no selected days for Solar computations.|
<lsk_eras_2>
|There is no <em>visible</em> days - at the specified latitude - selected for Solar computations|

<lsk_erasdefs_1>
|No day data for %.2i/%.2i (trial verion) found in this meteo file : %s|
<lsk_erasdefs_2>
|No day data found in this meteo file : %s|

<lsk_cb_load_1>
|No scenes were found within this workspace.|
<lsk_cb_savews_1>
|Your workspace does not contain any 3D model nor analysis element.<br>&nbsp;<br>Continue ?|
<lsk_cb_savech_1>
|The scene - %s - has been modified<br>(<em>transformation, appending, surfaces properties,...</em>).<br>&nbsp;<br>Do you want to <b>export</b> (YES) this scene in <em>URB</em> format?|
<lsk_cb_savech_2>
|The workspace - %s - has changed (Elements, Analyses, scenes, scene properties,...) .<br>&nbsp;<br>Do you want to <b>save it</b> ?|
<lsk_cb_main_1>
|<table cellspacing="0" cellpadding="0" border="0">
<tr><td>File:</td><td><em>%s</em></td></tr>
<tr><td>Surfaces:</td><td>%i</td></tr>
<tr><td>Vegetation elements:</td><td>%s</td></tr>
<tr><td>Materials:</td><td>%i</td></tr>
<tr><td>Textures:</td><td>%s</td></tr>
<tr><td>Transparencies:</td><td>%s</td></tr>
<tr><td>Bounds:</td><td>(%.2f, %.2f, %.2f) >> (%.2f, %.2f, %.2f)</td></tr>
</table>|
<lsk_cb_main_2>
|No current projection to edit.<br>&nbsp;<br>Please <b>select</b> a scene to view.|
<lsk_cb_main_3>
|Element edition/creation is not possible in results viewing mode.<br><br>Please <b>select</b> the scene (<em>double-clic</em>) in order to enter edition mode.|
<lsk_cb_main_4>
|No scene is selected : element edition/creation is not possible.<br><br>Please <b>select</b> a scene in order to enter edition mode.|

<lsk_courbes_readwhat_1>
|Sorry, comparison of <em>single point</em> results details is not available for this type of analysis.|

<lsk_elem_modeler_1>
|In order to create an urban volume/element, you should <b>load</b> or <b>select</b> a scene.|
<lsk_elem_modeler_2>
|<b>Invalide</b> values in the points coordinates field.|
<lsk_elem_modeler_2_1>
|<b>Unsufficient</b> number of points (coordinates).<br>&nbsp;<br>At least 3 points for a <em>Surface</em>, 2 points for a <em>Polyline</em>, and one point for a <em>Point</em> element.|
<lsk_elem_modeler_3>
|You must enter a <b>name</b> for the element.|
<lsk_elem_modeler_4>
|<b>Unsufficient</b> number of points.|
<lsk_elem_dis_cb_1>
|<b>Unsufficient</b> number of points.<br>&nbsp;<br>The orientation is calculated using the cross product, it needs at least 3 points.|

<lsk_fprops_cb_1>
|This suface type - %s - is already added.<br>&nbsp;<br>Do you want to <b>add it</b> (YES) anyway ?|

<lsk_main_cb_1>
|Sorry, Mpeg sequence generation is <b>not available</b> in <em>trial version</em>.|
<lsk_main_cb_2>
|Unable to initialize Mpeg sequence generation.<br>&nbsp;<br>Please contact <a href='mailto:azar@townscope.com?subject=TownScope_mpeg_error>S. AZAR</a> for more information.|

<lsk_main_onopen_1>
|Unable to find your license file.<br>&nbsp;<br>Please contact <a href='mailto:azar@townscope.com?subject=TownScope demo license file'>S. AZAR</a> for more information.|
<lsk_main_onopen_2>
|Your System date/time is not correct. Please fix it.|
<lsk_main_onopen_3>
|Your License has expired on : %s<br>&nbsp;<br>You can download a new version from the <a href='http://www.townscope.com'>TownScope</a> software website.<br>&nbsp;<br>Please contact <a href='mailto:azar@townscope.com?subject=TownScope_demo_expired'>S. AZAR</a> for more information.|
<lsk_main_onopen_4>
|Welcome. This is a fully functional trial version of TownScope.<br>License expires on %s<br>&nbsp;<br>Please do not hesitate to send any comment or suggestion concerning the software to : <a href='mailto:azar@townscope.com?subject=TownScope_demo'>S. AZAR</a>|
<lsk_main_onopen_5>
|Welcome. This is a trial version of TownScope.<br>License expires on %s<br>&nbsp;<br>Please do not hesitate to send any comment or suggestion concerning the software to : <a href='mailto:azar@townscope.com?subject=TownScope_demo'>S. AZAR</a>|

<lsk_prefs_cb_1>
|Sorry, in <em>trial version</em>, solar access and comfort evaluation analyses can be calculated only on june 15.|
<lsk_prefs_eras_meteo_1>
|Delete this weather data file ?<br>You can <b>not undo</b> this operation !|

<lsk_projview_1>
|Graphical edition can be done only in Parallel projection.|

<lsk_tools_app>
|Append scene file|
<lsk_tools_tra>
|Transform scene|
<lsk_tools_exp>
|Export active scene|
<lsk_tools_ter>
|Terrain from points|
<lsk_tool_sct>
|Create script file|
<lsk_tool_win>
|Wind risk tutorial|
<lsk_tools_hlp>
|Help on tools|
<lsk_tools_prm>
|PROMETHEE decision aid|

<lsk_tools_cb_exp>
|Please <b>select</b> a scene to export.|
<lsk_tools_cb_app>
|Please <b>select</b> a scene to which you want to append.|
<lsk_tools_cb_scr>
|No analyses defined.<br>&nbsp;<br><b>Script</b> files are used to <b>automtically load and execute</b> all defined analyses in the current workspace.|
<lsk_tools_cb_tra>
|Please <b>select</b> a scene to transform.|
<lsk_tools_transf_1>
|Transforming the scenes real coordinates without transforming the elements <b>invalidates</b> the computed results (if any).<br>&nbsp;<br>Do you want to continue (YES) ?|

<lsk_view_cb_1>
|Results viewing is not possible in spherical projections.|

<lsk_main_sc_tools_1>
|Close selected scenes|
<lsk_main_sc_tools_2>
|Information about the activated scene|
<lsk_main_ed_tools_0>
|Actions on selected items|
<lsk_main_ed_tools_0_1>
|<em>Short cut actions</em> are only possible on selected surfaces in parallele projection.|
<lsk_main_ed_tools_0_2>
|No selection was found.<br>&nbsp;<br>These <em>short cut actions</em> can only be done on selected surfaces.|
<lsk_main_ed_tools_0_3>
|Many surfaces are selected : <b>%i</b><br>&nbsp;<br>Do you want to create one <em>Multi-element</em>, or one element for each surface ?
<ul>
<li>Choose <b>OK</b> to group all the surfaces in <b>one element</b></li>.
<li>Choose <b>No</b> to create one element for <b>each</b> surface</li>
<li>Choose <b>Cancel</b> to stop this operation</li>
</ul>
<b>Attention :</b> Verify the <em>orientation vectors</em> shown in red on each created zone element. it should be pointing toward outside.
Please look in the help pages form more information.|
<lsk_main_ed_tools_1>
|Information about the displayed items (Ctrl+i)
(Surface properties, Analysis results,...)|
<lsk_main_ed_tools_2>
|Zoom in & recenter|
<lsk_main_ed_tools_3>
|Zoom out|
<lsk_main_ed_tools_4>
|Translate|
<lsk_main_ed_tools_4_1>
|Reset the current view|
<lsk_main_ed_tools_5>
|SnapShot of the current view|
<lsk_main_ed_tools_6>
|MPEG sequence recording (start/stop)|

<lsk_tb_open_1>
|Open|
<lsk_tb_open_2>
|open scene, workspace, results file,... (Ctrl+o)|
<lsk_tb_save_1>
|Save WorkSpace|
<lsk_tb_save_2>
|Save all the currently used data (scenes, elements,...) in your workspace (Ctrl+s)|
<lsk_tb_close_1>
|Close WS|
<lsk_tb_close_2>
|Reset workspace (close all scenes, free all elements,...)|
<lsk_tb_prefs_1>
|Settings|
<lsk_tb_prefs_2>
|TownScope settings panel (Ctrl+t)|
<lsk_tb_tools_1>
|Tools|
<lsk_tb_tools_2>
|Extra tools and utilities|
<lsk_tb_view_1>
|View|
<lsk_tb_view_2>
|Edit active scene view (Ctrl+v)|
<lsk_tb_view_3>
|Select view (uses default values)|
<lsk_tb_define_1>
|Define|
<lsk_tb_define_2>
|Elements defintion manager (Ctrl+e)|
<lsk_tb_ana_1>
|Analyse|
<lsk_tb_ana_2>
|Analyses manager (Ctrl+a)|
<lsk_tb_help_1>
|Help|
<lsk_tb_help_2>
|TownScope help Ctrl+h)|
<lsk_tb_about_1>
|About|
<lsk_tb_about_2>
|About TownScope|
<lsk_tb_exit_1>
|Exit|
<lsk_tb_exit_2>
|Exit TownScope (Ctrl+q)|

<lsk_help_but_2>
|Help on this window (fields and actions description)|

<lsk_ana_win_1>
|Analyses|
<lsk_ana_win_2>
|Analysis type|
<lsk_ana_win_3>
| Scenes|
<lsk_ana_win_4>
|Elements|
<lsk_ana_win_5>
|Force computations|
<lsk_ana_win_6>
|@2->  Add|
<lsk_ana_win_6_1>
|Add analyses|
<lsk_ana_win_7>
|Working...|
<lsk_ana_win_tools_1>
|Edit selected element|
<lsk_ana_win_tools_2>
|Delete selected element(s)|
<lsk_ana_win_tools_3>
|Move UP selected analysis|
<lsk_ana_win_tools_4>
|Move DOWN selected analysis|
<lsk_ana_win_tools_5>
|Delete selected analysis|
<lsk_ana_win_tools_6>
|View selected analysis results|
<lsk_ana_win_tools_7>
|Export ALL selected analysis results|
<lsk_ana_win_tools_8>
|Merge selected analysis into a new one|
<lsk_ana_exe_1>
|Execute|
<lsk_ana_exe_2>
|Execute SELECTED analyses|

<lsk_meteo_hum>
|Humidity [0.5...10]|
<lsk_meteo_tur>
|Global air turbidity|
<lsk_meteo_ratio>
|Edhcs/Ethcs [%]|
<lsk_meteo_cloud>
|Clouding rate [%]|
<lsk_meteo_air_temp>
|Air temperature [C]|
<lsk_meteo_wind>
|Wind speed [Km/h]|
<lsk_meteo_clo>
|Clothing insulation [clo]|
<lsk_meteo_vege>
|Vegetation opacity [%]|
<lsk_meteo_msg>
|Per month values (from Jan to Dec).
Clic & Drag the red bars to change parameters values.|